Kl. Str. Drain Enl., Phase II, Specs.  200C-954 - RHC Constr., Inc., Contractor

United States. Bureau of Reclamation

P12-201-4565NA Klamath Project, OR-CA. Center Canal Flume Bridge. After the 3/4" hole was augered, a steel pin was used to punch a mark on the opposite side of the steel sleeve. Then an oxy-acetylene torch was used to cut a hole in the steel sleeve; April 4, 1978; USBR photo by D.J. Kline

Title

Kl. Str. Drain Enl., Phase II, Specs. 200C-954 - RHC Constr., Inc., Contractor

Creator

United States. Bureau of Reclamation

Source

Original photograph: 10 x 13 cm, black & white photo, caption under photo reads "P12-201-4565NA Klamath Project, OR-CA Kl. Str. Drain Enl., Phase II, Specs. 200C-954 - RHC Constr., Inc., Contractor Center Canal Flume Bridge. After the 3/4" hole was augered, a steel pin was used to punch a mark on the opposite side of the steel sleeve. Then an oxy-acetylene torch was used to cut a hole in the steel sleeve; Apr. 4, 1978; USBR photo by D.J. Kline", from Black Binders
Digital reproduction of photograph: P12-201-4565NA Klamath Project, OR-CA, Black Binders, Bureau of Reclamation

Date Original

1978-04-04

Date Digitized

2007-03-19

Date Available

2009-06-01

Other Identifiers

local: BOR-19-Mar-2007-4345

Subject (Topic)

Irrigation projects
Klamath Project (U.S.) -- History
Irrigation canals and flumes -- Design and construction
Klamath Project Construction
Klamath Straits Drain (Oregon)
Center Canal (Oregon)

Format

image